Can I install DrySpace by myself?
Yes. Complete, easy-to-follow instructions come with your DrySpace purchase. Installation is easiest with two people. You are likely to have the tools and materials you need, or they are easy to find at your local hardware store.
Back to Top
Is professional installation of DrySpace available?
Yes. DrySpace has professionally- trained Certified Installers in most geographic locations. Visit our Dealer/Contractor Finder to locate a Certified DrySpace Installer in your area.
Back to Top
Will chemical treatments or stains damage DrySpace?
No. Common, off-the-shelf stains and chemical wood cleaning treatments have no adverse effects on DrySpace.
Back to Top
Is there a DrySpace warranty?
Yes. TimberTech DrySpace has a 25-year limited residential warranty on products purchased on or after Jauary 1, 2007. DrySpace products purchased prior to this date have a 5-year limited warranty. TimberTech warrants to the original consumer purchaser that under normal use and service conditions, the DrySpace System will not peel, blister, pit, flake, crack or corrode as a result of manufacturing defects, or as a result of exposure to ocean air (salt spray). Click here to visit the warranty page.
Back to Top
Can I splice panels together to save material?
No. There is no way to make a joint between the Joist Covers and/or Panels that will prevent leaks. DrySpace comes in 12’ and 16’ lengths that allow for seamless installations. The 16’ kits are ideal for DrySpace installations where the joist cavities are 8' long.
Back to Top
My deck was constructed with pitch away from the house. Can I install the Joist Covers tight to the bottom of the joist?
No. The Combo Bracket and Joist Cover is a gutter that does collect water. When the Combo Bracket or Joist Cover is installed tight to the bottom of the joist, water cannot freely flow from the Combo Bracket or Joist Covers.
Back to Top
Can I run the Panels over the top of a beam?
Panels must always stop 3” from the beam. In most cases the low point of the Panel will interfere with the beam causing water to dam on the Panel. Combo Brackets and Joist Covers should stop 1” from the beam.
Back to Top
I have a support beam 3' from my house. Can I run the Panels over the top of the beam?
While the Panels would clear the beam 3' from the house, the Joist Covers must terminate at the beam. The Panels should also be trimmed at this point. Because the Joist Cover is a gutter any water that drains from the Joist Covers should be collected with a K-style gutter.
Back to Top
Will the Combo Bracket or Joist Cover cause my deck to rot?
No. When properly installed the Combo Bracket or Joist Cover channels water away from the house and out of the Combo Bracket or Joist Cover. This also allows for airflow between the Combo Bracket or Joist Cover and joist.
Back to Top
Can I paint DrySpace?
We would not recommend it because of the maintenance issues, but yes DrySpace can be painted.
Back to Top
Can I install a more decorative ceiling under DrySpace?
No. That would require penetrating the Joist Covers with nails or screws.
Back to Top
Could I install DrySpace by using F-Brackets only and not the Combo Bracket (Joist Cover/F-Bracket combo)?
No. The Combo Bracket (Joist Cover/F-Bracket Combo) must be used to collect any water that drains through or around the joist.
Back to Top
What is TimberTech?
TimberTech is a leading manufacturer of low-maintenance, high-quality decking and railing solutions. TimberTech products provide a revolutionary alternative to traditional wood - they don't rot, warp or splinter, and they look great year after year. And unlike wood, TimberTech products require no painting, staining or sealing.
Back to Top
Does TimberTech have a warranty?
Yes. The warranty is given to the original consumer purchaser of TimberTech decking materials, railing systems,(excluding metal baluster components of such rail systems,which are covered under a separate 10-year warranty) and DrySpace drainage system. TimberTech warrants to Purchaser that, for a period of twenty-five (25) years from the date of the original consumer purchase, under normal use and service conditions, that the decking and railing materials will be free from material defects in workmanship and materials, and will not check, split, splinter, rot or suffer structural damage from termites or fungal decay; and the DrySpace System will not peel, blister, pit, flake, crack or corrode as a result of manufacturing defects, or as a result of exposure to ocean air (salt spray). Click here to visit the warranty page.
Back to Top
Can TimberTech help design my deck?
There is a program on the TimberTech Web site called Design a Deck. This program will allow you to select your deck shape and size, add stairs and railings and a second level. After you submit your custom design, your Deck Specification Kit gives you a 3-D model of your design, how-to checklist, tips for success and a material list.
Back to Top
Where would I find a contractor that is trained to install TimberTech decks?
Please visit the contractor locator section where you will be able to input your ZIP code and this will pull up the Elite Contractors in your area. TimberTech Elite Contractors are independent contractors that have been provided training and information regarding TimberTech products.
Back to Top
Does TimberTech decking come in any colors?
TimberTech decking planks come in nine product profiles and nine colors. Earthwood Plank and Floorizon Plank come in Tropical Rosewood, Tropical Teak and Tropical Walnut. XLM Plank comes in Mountain Cedar, RiverRock and SandRidge. Floorizon Plank and TwinFinish Plank come in TimberTech Cedar, Grey and Redwood. ValuPlank and DockSider come in TimberTech Cedar and Grey.
Back to Top
Does TimberTech railing come in colors?
Yes, TimberTech’s Ornamental Rail is available in Cedar, Grey, Redwood and WhiteSand. TimberTech RadianceRail comes in a Coastal White and Classic Black. And TimberTech BuilderRail comes in Cedar, Grey and Redwood with black metal balusters.
Back to Top
Will TimberTech decking and railing fade in color?
Yes, most materials exposed to UV and weathering will fade. TimberTech decking and railing solutions are blended with high quality raw material and UV-inhibiting pigments to produce products consistent in color. Because of the quality of material used, most TimberTech decking and railing products fade less than other composites available.
Back to Top
What effect does heat have on TimberTech products?
The effect that heat has on TimberTech products is similar to the effect it has on a wood deck. All TimberTech colors were developed with reflective, inorganic pigments which are more expensive than organic pigments, but dramatically reduce heat build-up. Some competitors use organic pigment due to the cost of the reflective, inorganic pigments.
TimberTech's R&D engineers have been developing pigment systems for vinyl siding for over 60 years, providing the expertise for TimberTech to have one of the coolest composites available.
Back to Top
How will saltwater affect TimberTech products?
Saltwater climates are a perfect application for TimberTech products. Saltwater will have no ill effects on TimberTech.
Back to Top
Can TimberTech products be used as a porch?
Yes, many porches are built with TimberTech products. However, if using Floorizon Plank, special ventilation requirements must be met. There must be a minimum of 12" unobstructed continuois airspace along three sides of the deck to allow cross ventilation for Floorizon Plank. This should be located just below the bottom of the deck joist. Refer to the TimberTech Installation & Maintenance Guide.
Back to Top
Can I build my TimberTech deck directly over an existing surface?
See below for minimum space requirements for your TimberTech deck planks:
XLM Plank, Earthwood Plank, DockSider Plank, TwinFinish Plank and ValuPlank
There must be a minimum of a 2" (nominal) sleeper system supported by and connected to the substructure over which the deck is to be built.
Floorizon Plank
There must be a minimum 12" high unobstructed continuous air space along at least three sides of the deck to allow for cross ventilation. Specific application requirements apply to Floorizon. Please see our Installation Instructions for proper ventilation requirements.
Back to Top
Can I use TimberTech for the surface of a boat dock?
Yes, TimberTech DockSider Plank is ideal for dock, marina and boardwalk applications. TimberTech DockSider can span 24" on-center for both residential and commercial applications. TimberTech XLM Plank, Earthwood Plank, TwinFinish Plank, and ValuPlank can also be used on docks. Floorizon Plank cannot be used in this application due to ventilation requirements.
Back to Top
Can I use TimberTech Floorizon product if I do not have a minimum of 12" from the bottom of the joist to the ground?
No, the Floorizon product cannot be used in any application that does not have at least 12" from the bottom of the joist to the ground. Without adequate ventilation, the top surface is typically dry and underneath the deck could be damp from moisture and or humidity. This, in some cases, may cause the Floorizon profile to cup slightly and would void the warranty. Please see our Installation Instructions for proper ventilation requirements.
Back to Top
Can I use TimberTech DrySpace with TimberTech Floorizon Deck Planks?
Yes. With proper installation, TimberTech DrySpace can be used with Floorizon Planks. The moisture will be carried away from underneath the Floorizon Planks. It is the moisture underneath the Floorizon Planks that could cause cupping. In addition, since the V-Panels are cut 3" from the beam or rim joist, there should be some air flow around the planks.
Back to Top
Can I use glue or caulk with TimberTech?
In the past, we have not recommended the use of glue or caulk with any TimberTech products. Some of our contractors have been successful using an adhesive identified as Tremco Vulkem 116 Polyurethane Adhesive, along with nails. This is what we would recommend if an adhesive were needed.
Back to Top
Can TimberTech's Floorizon Planks be made into a watertight surface?
No, TimberTech Floorizon is made with weep holes every 9" on the tongue. These weep holes allow water to drain off of the deck. Correct installation of the product with hand pressure gives you a gap of up to 1/4" between planks. This gap allows the product to expand and contract with temperature changes. If this gap is made watertight by a caulk product, the product will not have the ability to expand and contract in the gap. If your project requires a dry space beneath the deck you can install TimberTech DrySpace.
Back to Top
Can I use TimberTech DrySpace with TimberTech Floorizon Deck Planks?
Yes. With proper installation, TimberTech DrySpace can be used with Floorizon Deck Planks. The moisture will be carried away from underneath the Floorizon Deck Planks. It is the moisture underneath the Floorizon Deck Plank that could cause cupping. In addition, since the V-Panels are cut 3" from the beam or rim joist, there should be some air flow around the planks.
Back to Top
Can TimberTech Ornamental Rail and RadianceRail be curved?
Yes, our railing products can be curved in a variety of styles. Click here for details www.timbertech.com/curvedrail
Back to Top
I have a chip in the cap stock (outer layer) material on my RadianceRail; can I repair it or touch it up?
Yes, automotive touch-up paint such as Duplicolor 2 in 1 Scratch Fix works well and is available at most department or automotive retailers. For Coastal White use universal gloss white and for Classic Black use universal flat black.
Back to Top
How long are the RadianceRail baluster end plugs?
There is two inches of solid material with a centered pilot hole that extends through the entire end plug.
Back to Top
How do I cut the RadianceRail balusters for the stair applications and still maintain enough of the plug for a secure attachment?
Start the angled cut at the top edge of the baluster to maximize the length of the baluster and to minimize the amount of the plug being removed. Cut equal amounts from each end of the baluster.
Back to Top
Are the RadianceRail kits actually a full 6’ and 8’?
Yes, BUT the actual length of the railing assembly must be measured from center of post to center of post. The additional material is provided to allow for angles and end cuts/trimming.
Back to Top
My RadianceRail components appear to be two different shades, what should I do?
The two support rails within the kit could appear lighter or darker than the balance of the components. When assembled, these support rails will not be visible so you can proceed with assembling your rails.
Back to Top
Can TimberTech CONCEALoc Hidden Fasteners be used on angles?
Yes, any angle up to 45 degrees can be achieved. Simply align the screw hole in the fastener with the center of the joist.
Back to Top
How do I know how many CONCEALoc Hidden Fasteners I’ll need for my project?
You can determine the number of fasteners needed by multiplying the number of joist you have by the number of decking boards.TimberTech has made it easy by packaging CONCEALoc fasteners in cartons that cover 100 square feet or buckets that cover 1000 square feet.
Back to Top
Do I need to gap my planks when I'm using the CONCEALoc Hidden Fasteners?
The CONCEALoc fasteners provide proper/consistent spacing between the sides of the planks. You will need to gap the ends at all butt joints 1/8”.
Back to Top
Is it possible to replace a plank installed with CONCEALoc Hidden Fasteners, if it gets damaged after installation?
Yes, you can find complete details on how to do this in the TimberTech Installation Guide and on TimberTech’s website www.timbertech.com.
Back to Top
Can CONCEALoc Hidden Fasteners be used with other decking styles?
Yes, they can be used with all of the TimberTech solid planks (with a routed groove): XLM, Earthwood, TwinFinish, and Docksider. Refer to the TimberTech Installation Instructions.
Back to Top
What are the CONCEALoc Hidden Fasteners made of?
The CONCEALoc fasteners are made from .060 304 stainless steel. This material, with its high nickel content, will ensure a long life even in harsh environments.
Back to Top
What type of screw is provided?
Every carton and bucket of CONCEALoc Hidden Fasteners includes enough stainless steel screws to install the box of fasteners.
Back to Top
Are fasteners visible?
CONCEALoc Hidden Deck Fasteners have a dark brown coating. This coating helps the fastener hide in the shadow of the joists, and makes the fastener virtually invisible.
Back to Top
Where do I purchase the CONCEALoc Hidden Fasteners?
Any retailer that carries TimberTech products will have, or can get, CONCEALoc Hidden Fasteners.
Back to Top
Is there a CONCEALoc Hidden Fastener installation video available?
Yes, visit www.timbertech.com to view footage or request the DVD be sent to you by calling 1-800-307-7780.
Back to Top
What tools are required to install the CONCEALoc Hidden Fasteners?
No special tools are required when using TimberTech grooved planks, just a drill. When using TimberTech solid planks, a router will be needed to create a groove at each joist. You can find complete details on how to do this in the TimberTech Installation Guide and on TimberTech’s website www.timbertech.com.
Back to Top
How are the BuilderRail metal balusters coated and doesn’t iron typically rust?
TimberTech iron products are galvanized inside and out, and powder coated to allow for the highest standard of quality on the market. All powder coated products are backed by a 10-year limited warranty against manufacturing defects.
Back to Top
Does TimberTech make a post cover and skirt to match my BuilderRail?
Yes. Use TimberTech’s Ornamental Railing post covers and post skirts in Cedar, Grey and Redwood to complete your railing project. For a full list of accessories visit timbertech.com
Back to Top
What is the benefit of using the BuilderRail rail bracket?
The benefit of using our color matched powder coated rail bracket is strength and safety. Using the bracket provides a code compliant system that is easy to install and looks great.
Back to Top
Does BuilderRail have code approval?
BuilderRail has been submitted for CCRR and ICC testing.
Back to Top
What is the maximum span of BuilderRail?
BuilderRail is designed to span 8’ from center to center of post. BuilderRail is provided in full 6’ and 8’ lengths but should never be installed at full length.
Back to Top
|